L2Tp Server - Pirelli P.RG F4202N User Manual

L2TP SERVER

© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
100
P.RG F4202N
Enable Anti-Replay Protection Select this option to enable dropping of pack-
ets that are recognized (by their sequence number) as already been received.
Connections This section displays the list of IPSec connections.
IPSec Panel
FIGURE 17.
Access this feature either from its link in the 'VPN' tab under the 'Services'
screen, or by clicking the 'L2TP' icon in the 'Advanced' screen. This screen en-
ables you to configure the following:
Enabled Select or deselect this check box to enable or disable this feature.
Note that checking this box creates an L2TP server (if not yet created with the
wizard), but does not define remote users.
Click Here to Create VPN Users Click this link to define remote users that will
be granted access to your home network.
Protect L2TP Connection by IPSec By default, the L2TP connection is not
protected by the IP Security (IPSec) protocol. Check this option to enable this
feature. When enabled, the following entry appears.
Create Default IPSec Connection When creating an L2TP Server with the
connection wizard, a default IPSec connection is created to protect it. If you
wish to disable this feature, uncheck this option. However, note that if L2TP pro-
tection is enabled by IPSec (see previous entry), you must provide an alterna-
tive, active IPSec connection in order for users to be able to connect. When this
feature is enabled, the following entry appears.
HBK 939800036-A1 Advanced Section