Aastra 6739i User Manual page 90

Options Key
The following Aastra Web UI screen shows the states you can configure for your phone.
The following table describes the states available to configure for the softkeys.
State Description
idle The phone is not being used.
connected The current line is in an active call (or the call is on hold).
incoming The phone is ringing.
outgoing The user is dialing a number, or the far-end is ringing.
busy The current line is busy because the line is in use or the line is set as "Do Not Disturb".
The following table identifies the applicable default states for each softkey type on the IP phone
Key Function Description
None All states disabled.
Line idle, connected, incoming, outgoing, busy
Speed Dial idle, connected, incoming, outgoing, busy
Do Not Disturb idle, connected, incoming, outgoing, busy
Busy Lamp Field (BLF) connected
BLF List connected
Auto Call Distribution (ACD) idle
Directed Call Pickup (DCP)/ idle, connected, incoming, outgoing, busy
Group Call Pickup (GCP)
XML connected
Flash All states disabled
Park connected
Pickup idle, outgoing
Call Forward idle, connected, incoming, outgoing, busy
BLF/Xfer connected
Speed Dial/Xfer idle, connected, incoming, outgoing, busy
Speed Dial/Conf idle, connected, incoming, outgoing, busy
Phone Lock All states disabled.
84
Configurable Softkey States
41-001317-05 REV00 – 03.2011