Setting Headset Device
IP Phone UI
1.
Press
on the phone to enter the Options List.
2.
Press the <Audio> key.
3.
Press the <Headset Device> key. The following values display:
•
Wired (default)
•
DHSG
•
Bluetooth
4.
Press the value you want to set for the headset device.
5.
Press the value you want to set for the Audio Mode.
6.
Press the
to return to the previous menu or press the
Headset Mic Volume
The "Headset Mic Volume" option allows you to set the volume level for the headset microphone.
Setting Headset Mic Volume
IP Phone UI
1.
Press
on the phone to enter the Options List.
2.
Press the <Audio> key.
3.
Press the <Headset Mic Volume> key. The following values display:
•
Low
•
Medium (default)
•
High
4.
Press the value you want to set for the headset microphone volume.
5.
Press the
to return to the previous menu or press the
Ring Tone
There are several distinct ring tones a user can select to set on the IP phones. You can enable/disable these ring tones on a
global or per-line basis.
The following table identifies the valid settings and default values for each type of configuration method.
41-001317-05 REV00 – 03.2011
to return to the idle screen.
to return to the idle screen.
Options Key
57