Aastra 6739i User Manual page 126

Options Key
Using the Paging Key
The following procedure describes the use of the Paging key on the IP Phone. The procedure assumes you have already
configured the Paging key using the Aastra Web UI.
IP Phone UI
Notes:
1.Recipient of a Paging call can set a global "Do Not Disturb" (DND) to ignore any incoming pages.
2.For incoming Paging, the phone uses the Intercom configuration settings. The incoming Page is dependant on the
"Allow Barge-In" parameter setting and the "Idling/On Call" state.
1. On the IP Phone, press the softkey or expansion module key you configured for Paging (labeled as "Group 1" in
the following illustration)..
The phone opens a multicast RTP session and an outgoing OR incoming phone screen displays as follows.
2. Press the Drop key to end the multicast RTP session and return to the idle screen.
Note:
If you enable global DND on the phone, the incoming multicast RTP session is dropped.
120
L1 John Smith 401
Group 1
John Smith
LAB
401
ACD
L1 John Smith 401
Paging 00:01
Drop
Mon Jan 1
12 : 45pm
Mon Jan 1
12 : 45pm
41-001317-05 REV00 – 03.2011