Aastra 6739i User Manual page 179

Configuring "Preferred Line" and "Preferred Line Timeout" Using the Aastra Web UI
Use the following procedure to configure the Preferred Line and Preferred Line Timeout feature using the Aastra Web UI.
Aastra Web UI
1. Click on Basic Settings->Preferences->General.
2. In the "Preferred Line" field, select a preferred line to switch focus to after incoming or outgoing calls end on
the phone. Default is 1. Valid values are:
• None (disables the preferred line focus feature)
• 1 to 9
For example, if you set the preferred line to "1", when a call (incoming or outgoing) ends on the phone (on any
line), the phone switches focus back to Line 1.
3. In the "Preferred Line Timeout" field, enter the amount of time, in seconds, that the phone switches back to the
preferred line after a call (incoming or outgoing) ends on the phone, or after a duration of inactivity on an active
line. Default is 0. Valid values are:
• 0 to 999
4. Click Save Settings.
41-001317-05 REV00 – 03.2011
Additional Features
173