Aastra 6739i User Manual page 127

None Softkey
All softkeys, by default, are set to "None" on the IP Phone. The "None" function displays as "None" on a softkey, and indi-
cates there is no function assigned to this softkey. Changing a configured softkey to "None" disables the function softkey.
For more information about key behavior, see
Configuring a None Softkey
Use the following procedures to configure a None softkey on your phone.
IP Phone UI
1. Press on the phone to enter the Options List.
2. Press the <Softkeys> key.
3. Press a key that has a configuration function. A softkey configuration screen displays.
4. In the "Type" field, press the function key. A screen displays with softkey keys.
5. Press the <None> function key to apply to the softkey.
6. Press <Save> to save the softkey. The softkey applies to your phone immediately and displays on your idle screen.
7. Press the to return to the previous menu or press the
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module.
Softkeys
2. Select from "Key 1" through "Key 55".
3. In the "Type" field, select None.
Expansion Module Keys
4. Select an expansion module key.
5. In the "Type" field, select None.
6. Click Save Settings.
Empty Softkey
When you first setup your phone out of the box, the softkeys display as blank on the idle screen. These softkeys are set to
"empty" and indicate there are no softkeys configured on the phone. The "empty" function forces a blank entry on the
softkey and disables configured softkeys.
41-001317-05 REV00 – 03.2011
"Key Display Behaviour" on page
to return to the idle screen.
Options Key
85.
121