Aastra 6739i User Manual page 161

figuration.) Using the Aastra Web UI, if you make changes to that initial account, the changes apply to all accounts on
the phone.
• Custom - The Custom mode allows you to configure CFWD for a specific account or all accounts. You can configure a
specific mode (All, Busy, and/or No Answer) for each account independently or all accounts. You can set all the
accounts ON or OFF. Using the IP Phone UI, you can also press the "Copy to all modes" key to copy a phone number to
other phone number fields.
You can enable different CFWD parameters independently (for example, you can set different phone numbers for Busy,
All, and NoAnswer and then turn them on/off individually).
The following table describes the key and Message Waiting Indicator (MWI) LEDs when you enable CFWD on the IP Phone.
Key LED Behaviour for All Modes
CFWD key LED RED if CFWD All, CFWD Busy, or CFWD No Answer is
enabled for the account in focus.
CFWD key LED OFF if any CFWD mode is disabled.
Note:
If you make changes to the configuration for CFWD via the IP Phone UI, you must refresh the Aastra Web UI screen to
see the changes.
Configuring CFWD Mode Using the Aastra Web UI
Use the following procedure to configure the CFWD mode using the Aastra Web UI.
Aastra Web UI
1. Click on Basic Settings->Preferences->General.
41-001317-05 REV00 – 03.2011
MWI LED Behaviour for All Modes
MWI LED ON if current account in focus has CFWD ALL ena-
bled.
MWI LED OFF if CFWD All is disable
Managing Calls
155