CDVI CDV-DDP User Manual page 22

Check online monitors:
> > D e b u g S t a t e < <
0 - #
1 - #
2 - #
In Debug State, press '1 #'
key
Search Range: input the monitor address. For example,
input the range from 01 to 05. You will see the connection
status of the selected monitors.
13. Namelist function:
The door station is designed to have digital keypad and big TFT screen. Its namelist was shown
on the screen and customer can do the calling operation through the digital keypad guided by
Namelist on the screen. 2 types of namelist can be shown on the screen : DT-Config namelist
and Simulate namelist.
Enter namelist page:
Press '9#' in standby mode to display the user namelist. Press"#" key to scroll next/last page.
and use key 1 to 8 key on each page to call the flat you want.Please refer to the DT-Config
software user instructions for configure the namelist.
Send namelist to monitors
The namelist can be sent to monitors by door station directly.Connect the door station and mon-
tiors correctly to the system.Then press # 8012 in standby mode ,and input password (66666666
by default) to send namelist to all the monitors.
-20-
R e d i a l
To o l s
E x i t s
Press '4' key
1 . I n s t a l l e r S e t u p
Tools
2 . S e t u p
3 . C a r d M e m o r y
4 . O n l i n e M o n i t o r s
Pres NO.
to select 5 . O n l i n e D e v i c e s
6 . V o l t a g e M e a s u r e
*Back
4 . O n l i n e M o n i t o r s
[ - - ] ~ [ - - ]
(Search Range)
* Back # Save
Input 2 digits
monitor code
4 # . O n l i n e M o n i t o r s
[ 01 ] Online
[ 02 ] Online
[ 03 ] Online
[ 04 ] Fall
[ 05 ] Online
* Back # Save