CDVI CDV-DDP User Manual page 20

Card information:
Enter Card Information page, and the
screen will display the authorized User
Cards count, and card read access
events count.
Format:
Enter Card Format page, a password
will be asked,input 8 digits installer
password (66666666 by default),then
press" #" key to save,format operation
is activated.all card information will be
cleared.
11. Change Door Station Language:
It's convenient to change the user interface for CDV-DDP.Just put the config files to the SD card
and by means of the digital keypad of door station,only 30 seconds is needed to update.
Step 1: Insert the SD card which is con-
tained config files into the SD card slot
where is at the back of the door station.
Refer to the right diagram.
Step 2:
If door station runs as Debug State, you can press "1#" to activate Tools Menu, select "2" to
enter setup page,then select 1 item.If it runs as Normal State, follow these steps:
-18-
4 . C a r d s I n f o r m a t i o n
Card Count: 1000
* Back # Save
5 . F o r m a t
[ - - - - - - - - ]
Please Input Password
* Back # Save
SD Card Slot
3 2 1
Insert SD card
L1 L2
CN-LK
T/R - T/R+ Bus
3 2 1
J/KMB JP-LK