Auto Pick Up Programming - Tadiran Telecom EMERALD ICE Quick Start Manual

Note:
1. The unit will generate the reference ring or/and vibration
for the user to refer the ring type.
2. The mark [_ã] means that user enables this function.
3. There are some icons (( )) on the row-1. It will indicate
user's setting. Ring and/or Vibration.
4. Press the [F1] key, the change sequence is [RING =>
VIBRATOR => RING + VIB => RING
=> ...]. And, if press [F2] key, the change sequence is
[RING + VIB => VIBRATOR => RING
=> RING + VIB => ...... ].

Auto Pick Up Programming

Auto Pick Up Programming allows the user to pick up the phone
call by receiver or handsfree mode when the user lifts the hand-
set from the cradle.
There are 3 available modes for [Auto Pick Up] programming:
• RECEIVER
• HANDSFREE
• DISABLE.
The default setting is for RECEIVER.
1. Press and hold the [F1] key for 1 second to enter the pro-
gramming mode.
2. Press [F1] 4 more times and the LCD will display:
Programming the Handset
Page 3-9