Vibration Programming - Tadiran Telecom EMERALD ICE Quick Start Manual

Note:
1. The base doesn't need to enter the de-registration
mode. And, the system must be in idle mode.
2. Only one handset can de-register to the base at a time.
3. The handset can register to the other base without de-
registration to the original base. But the original base will
keep the handset information forever.
4. About the registration operation, please check Registra-
tion or Installation section.

Vibration Programming

There are 3 Vibration modes available:
• RING
• VIBRATOR
• RING + VIBRATOR
The default setting is for RING.
1. Press and hold the [F1] key for 1 second to enter the pro-
gramming mode.
2. Press the [F1] key 3 more times and the LCD will display:
3. Press [F3] to enter the change mode. The LCD will display:
Programming the Handset
Page 3-7