Connect To Ksu - Tadiran Telecom EMERALD ICE Quick Start Manual

Emerald ICE Cordless Handset Quick Start Guide
b) The handset unit must be moved to near the base to
receive de-registration command from base unit.
c) Only one handset can de-register to the base at a
time.
3. After de-registration, the handset LCD will display:
4. About the De-Register, please refer to the part of the pro-
gramming mode for further detail.

Connect to KSU

Use can connect line#1 and line#2 between the KSU and unit to
finish the setting. The corrective connection procedure should
be:
1. Remove Line#1, Line#2, and power cord from base unit.
2. First of all, connect Line#2. (You can skip it, if you use
line#1 only.)
3. Secondly, connect Line#1.
4. Finally, plug the power cord. (You can skip it, if you don't
use extra AC power.)
Note:
If user re-connects any line#1 or line#2 or AC power cord,
the system must follow the above procedure to re-connect
to the line and power cord. Otherwise, the system maybe
works incorrect.
Page 2-8