Tadiran Telecom EMERALD ICE Quick Start Manual page 10

The user can then use the above programming function keys to
set up 3 different LED flash cadences as follows:
1. Normal Operation: LED Flashes [Normally]: 500ms on,
500ms off, repeatedly. In Normal mode, the user can
make/receive a call by the handset unit through the base
unit.
2. Base In Transition Mode: LED Flash [Slowly]: 1000ms
on, 1000ms off, repeatedly. In the Transition mode, the
user is changes the DIP switches status. The system will
wait for 5 seconds to ensure correct operation.
3. Base In Register/De-Register Mode: LED Flash [Fast]:
125ms on, 125ms off, repeatedly. After a user changes
DIP switches status for 5 seconds, the base enters the reg-
ister and/or de-register mode. The user can register/de-
register the handset to the base.
Introduction
Page 1-3