Care And Maintenance; Cleaning The Hook Race And Feed Dog; Inserting The Bobbin Holder - Janome Memory Craft 5200 Instruction Manual

q
z
w
t
c
i
b
z
c
e
r
y
u
w
q

CARE AND MAINTENANCE

CAUTION:
Press button to open the sub needle plate and turn the
power switch off and unplug the machine before cleaning.
NOTE:
Do not dismantle the machine in any way other than what
is explained in this section.

Cleaning the Hook Race and Feed Dog

z Remove the needle and presser foot. Remove the
setscrew and remove the needle plate.
q Screwdriver
w Setscrew
e Needle plate
x
x Take out the bobbin. Lift up the bobbin holder and
remove it.
r Bobbin holder
c Clean the bobbin holder with a lint brush and soft dry
cloth.
t Lint brush
v
v Clean the feed dog and hook race with the lint brush.
y Feed dog
u Hook race
b Clean the hook race with a dry cloth. (You may also
use a vacuum cleaner.)
i Soft dry cloth

Inserting the bobbin holder

z Insert the bobbin holder.
x
x The knob of the bobbin holder should fit next to the
stopper on the hook race.
q Knob
w Stopper
c Reattach the needle plate and tighten the screws.
NOTE:
After cleaning the machine, attach the needle and presser
foot.
74