Janome Memory Craft 5200 Instruction Manual page 34

x
c
i
o
v
b n
!1
m
Zipper Sewing (continued)
x Attach the foot with the pin on the right. Sew
c Stop the machine 5 cm (2") before the foot reaches
v Close the zipper and open the upper fabric flat over
!0
b Detach the foot and attach it with the pin on the
n Stop the machine 5 cm (2") before the foot reaches
!2
m Open the zipper, then lower the foot and stitch the
32
through all the layers from the end of the zipper
opening, guiding the zipper teeth along the edge of
the foot.
the slider on the zipper tape. Lower the needle into
the fabric, and raise the foot. Open the zipper, then
lower the foot and stitch the remainder of the
seam.
i Slider
o 5 cm (2")
the zipper. Baste the upper fabric and zipper tape
together.
!0 Basting stitch
left. Backstitch across the end of opening to 1 cm
(3/8"). Turn the fabric 90 degrees and stitch
through the garment and zipper tape.
!1 Backstitch
the slider on the zipper tape. Lower the needle into
the fabric, and raise the foot. Remove the basting
stitches.
!2 Basting stitches
remainder of the seam.
After finish sewing, remove the basting stitches on
the upper fabric.