Table of Contents
Advertisement
q
q
q
Knit Stitch
q Pattern:
e
w Presser foot:
e Thread tension: AUTO
w
This stitch is recommended for sewing such fabrics as
synthetic knits and stretch velour, as it provides the
greatest amount of elasticity and strength.
Sew along the fabric edge leaving an adequate seam
allowance.
After sewing, trim the seam allowance close to the stitches.
Double Overedge Stitch
q Pattern:
e
w Presser foot:
e Thread tension: AUTO
w
This is an excellent stitch for fabrics that tend to ravel
extensively such as linens and gabardines.
Two rows of zigzag stitches are simultaneously sewn over
the edge to insure that fabric will not ravel.
Place the fabric edge next to the guide of the foot and then
sew.
NOTE:
Stitch width cannot be set narrower than 4.5.
Overlock Stitch
q Pattern:
e
w Presser foot:
e Thread tension: 6-8
w
This stitch finishes the edges of fabric similar to a
commercial overlocking machine for a professional look.
Place the fabric edge next to the guide of the foot and then
sew.
NOTE:
Stitch width cannot be changed.
37
#11 (mode 2)
Zigzag foot A
#12 (mode 2)
Overedge foot C
#13 (mode 2)
Overcast foot M
Advertisement
Table of Contents
Need help?
Do you have a question about the Memory Craft 5200 and is the answer not in the manual?
Questions and answers
I **** trying to set my memory craft 5200 computerised to overlock stitch I can’t get the mode 2 to”13 & thread tension to 6-8, I have changed everything else