Tacking - Janome Memory Craft 5200 Instruction Manual

q
e
t
r
w

Tacking

q Pattern:
e
w Presser foot:
e Thread tension:
w
Tacking is used to reinforce pockets, crotches and belt
carriers where extra strength is needed.
To sew
Depress the foot control until the machine stops
automatically.
q
The machine will sew a tacking 1.5 cm (9/16˝) long auto-
matically.
q 1.5 cm (9/16 ˝)
To sew a shorter tack
To sew a tack shorter than 1.5 cm (9/16˝), first stop the
machine after sewing the required length, and then press
the reverse stitch button.
The required length has been determined.
Start the machine and continue sewing until the machine
stops automatically.
w Starting point
e Required length
r Reverse stitch button
t Tack length
To sew the same size tack
To sew another tack at the same size, simply start the
machine and it will stop automatically when finished
sewing.
To sew a tack at a different size
To sew the next tack in a different size, press the memory
button and start sewing. Press the reverse stitch button
after sewing the required length.
The required length has been determined.
51
#25 (mode 2)
Satin stitch foot F
AUTO