Do you have a question about the Memory craft 4000 and is the answer not in the manual?
Questions and answers
Debbie Dewey
February 25, 2025
I can’t understand how to make the zig zag stitch work on my machine. Can you help?
1 comments:
Mr. Anderson
May 14, 2025
The context does not provide specific instructions for making the zig zag stitch work on a Janome 4000 sewing machine. However, based on the general troubleshooting steps mentioned for a similar issue, you can try the following:
1. Ensure the needle is correctly positioned. 2. Re-thread both the top thread and bobbin. 3. Clean the shuttle area. 4. Try adjusting the thread tension. 5. Check if the stitch width is set properly for zig zag. 6. Replace the needle if it is damaged.
If the problem continues, service by a qualified sewing machine technician may be needed.
Need help?
Do you have a question about the Memory craft 4000 and is the answer not in the manual?
Questions and answers
I can’t understand how to make the zig zag stitch work on my machine. Can you help?
The context does not provide specific instructions for making the zig zag stitch work on a Janome 4000 sewing machine. However, based on the general troubleshooting steps mentioned for a similar issue, you can try the following:
1. Ensure the needle is correctly positioned.
2. Re-thread both the top thread and bobbin.
3. Clean the shuttle area.
4. Try adjusting the thread tension.
5. Check if the stitch width is set properly for zig zag.
6. Replace the needle if it is damaged.
If the problem continues, service by a qualified sewing machine technician may be needed.
This answer is automatically generated