Care And Maintenance; Cleaning The Hook Race; Assembling The Hook Race - Janome MC 230E Instruction Book

1
q
w
2
y
3
y
4
5
1
e
e
2
e
e
t
r
u
u
i
i
q
e

CARE AND MAINTENANCE

Cleaning the hook race

WARNING:
Turn the power switch off and unplug the machine
before cleaning.
NOTE:
Do not dismantle the machine in any way other than
what is explained in this section.
Clean the outside of the machine with a soft cloth and
mild soap.
z Remove the setscrews with the screwdriver supplied
with the machine. Remove the needle plate and
presser foot.
q Setscrew
w Presser foot
e Screwdriver
r Setscrew
t Needle plate
x Lift up the bobbin holder y and remove it.
y Bobbin holder
c Clean the bobbin holder with the lint brush u.
u Lint brush
v Clean the hook race with the lint brush.
i Hook race
b Clean the hook race with a dry cloth.
(You may also use a vacuum cleaner.)

Assembling the hook race

z Insert the bobbin holder so that the knob fits next to
the stopper in the hook race.
q Knob
w
w Stopper
x Reattach the presser foot and needle plate.
Align the needle plate guide pins with the guide
holes on the needle plate and tighten the screw.
e Needle plate guide pins
NOTE:
After cleaning the machine, make sure the needle and
presser foot are attached.
45