Storing And Recalling The Pattern Combination; Storing The Pattern Combinations; Overwriting A Stored Combination - Janome Memory Craft 5200 Instruction Manual

Storing and Recalling the Pattern Combinations
A pattern combination can be stored in the memory for
future use even after turning the machine off.
The stored pattern combination can be recalled by pressing
the memory/call button.
You can store total 5 combinations in mode 2, mode 3 and
lettering mode.
NOTE:
Memory/call function is not available in mode 1.

Storing the pattern combinations

Program the desired pattern combination.
Press the memory/call button.
Press the memory button to store the stitch pattern
combination.
* The machine beeps and an hourglass appears on the
LCD screen while the machine is saving the stitch
pattern combination.
Do not turn the power switch off while the machine is
beeping or an hourglass
screen.
* You can access other memory address (M2 to M5) by
pressing the memory/call button.
* To exit from the memory/call mode, press any key except
the memory, clear, turnover memory, edit or help button.

Overwriting a stored combination

Program the desired combination.
Press the memory/call button to select the desired memory
address.
The LCD screen will show the pattern combination already
stored.
Press the memory button and the stored combination will
be replaced with the new combination.
71
is indicated on the LCD