Storing And Recalling A Pattern Combination; Storing A Pattern Combination - Janome Memory Craft 6700P Instruction Book

z
x
c
w
e
v
r
STORING AND RECALLING A PATTERN
COMBINATION
Up to 20 pattern combinations can be stored in the
memory for future use even after turning the power off.
The stored pattern combination can be recalled by
pressing the folder/FS key.

Storing a Pattern Combination

z Program a pattern combination.
Press the folder/FS key.
q
x The memory recall window appears.
c You can select the address where you want store the
pattern combination.
w
Turn the stitch width adjusting dial to turn the address
pages.
Turn the stitch length adjusting dial to move the cursor
to select the address.
The memory address is displayed on the upper left
corner of the LCD screen.
e
v Press the numeral key "1".
The pattern combination will be stored to the selected
memory address.
NOTE:
If a pattern combination has been already stored to
the address, the stored combination will be replaced
with the new one.
96
q Folder/FS key
w Memory address
e Cursor
r Stored pattern combination