Software - Xerox Phaser 3020BI User Manual

Software

Software
After you have set up your machine and connected it to your computer, you must install the printer
software. The software required for Windows or Macintosh is supplied on the CD delivered with your
machine. Additional software can be downloaded from www.xerox.com. The following software is
available:
Operating
CD
System
Printer Windows
Software
Printer Linux
Software
Printer Macintosh
Software
8 Xerox® Phaser® 3020
User Guide
• Printer Driver: Use the printer driver to take full advantage of your
printer's features.
• Xerox Easy Print Manager (EPM): Conveniently combines access to
device settings, printing environments, settings/actions, and launching
applications such as CentreWare Internet Services in one location.
Note: Login is required to change Printer Settings.
• Wireless Setting Program: When installing the printer, you can use the
Wireless Setting program that was automatically installed with the
printer driver to configure the wireless settings.
• SetIP Program: A utility program allowing you to select a network
interface and manually configure the addresses for use with the TCP/IP
protocol.
• Printer Driver: Use this driver to take full advantage of your printer's
features.
Note: Linux software is available on
• Printer Driver: Use this driver to take full advantage of your printer's
features.
• SetIP Program: A utility program allowing you to select a network
interface and manually configure the addresses for use with the TCP/IP
protocol.
Contents
www.xerox.com only.