Information Pages; Configuration Report - Xerox Phaser 3020BI User Manual

Information Pages

This option allows the user to print the following reports:
Report
Configuration
Demo Page
Supplies Info
Network Configuration
Usage Counter

Configuration Report

The Configuration Report lists printer information such as default settings, network settings including
IP address, and font settings. Use the information on the configuration page to help you configure
network settings for your printer, and to view page counts and system settings.
Printing a Configuration Report:
Press and hold the WPS button for 10 seconds. The green LED light flashes, goes solid, and then flashes
again. Release then.
You can view the IP address of your printer on the Configuration Report. IPv4 and IPv6 address
information is located in the Network Setup section of the Configuration Report under IPv4 and IPv6.
Note: You can also print the Configuration Report using CentreWare Internet Services by selecting
Status > Print Information.
This report provides information about your machine setup, including
the serial number, IP Address, installed options and the software
version.
The demo page is printed to check the quality of the print.
Prints the supplies information page.
This list shows information about your machine's network connection
and configuration.
This list shows the number of impressions made on the machine. The list
includes:
• Total Impressions
• Black Impressions
• Maintenance Impressions
• Sheets
Description
Xerox® Phaser® 3020
User Guide
Information Pages
9