Overview; Machine Status Indicator - Xerox Phaser 3020BI User Manual

Overview

Overview
This section provides information on what to do if a problem occurs with your machine. Follow this
problem-solving procedure:
1. When the machine status light changes or an error occurs, follow the steps indicated in this
section to resolve the problem.
2. If the problem cannot be resolved, power off and on, and try the job again.
3. If the problem persists, call for service.

Machine Status Indicator

The color of the Status LED located on the control panel indicates the machine's current status. The
table below describes the various indicators.
Color Status
None Off
On
Green
Blinking
Blinking
Red
On
Blinking
Orange
On
94 Xerox® Phaser® 3020
User Guide
Description
Machine is offline OR
Machine is in Power Saver mode, if Machine Status light
is off but Power button is blue.
The machine is on-line and ready to be used.
The machine is receiving and printing data.
Waiting for the WPS button to be pressed for manual
printing.
• A cover is open. Close the cover.
• There is no paper in the tray. Load paper in the tray.
(See Paper and Media.)
• The machine has stopped due to a major error.
• Manual duplex job is printing.
• Upgrading firmware.
• A paper jam has occurred (See
Jams.).
Clearing Paper