Jumper Settings - AXIOMTEK SHB212 Series User Manual

2.3

Jumper Settings

Proper jumer settings configure the SHB212 to meet your application
purpose. We are here with listing a summary table of all jumpers and
default settings for onboard devices, respectively.
Jumper
COM1 RS-232/422/485 setting
JP1
Default：RS-232
COM1 RS-232/422/485 setting
JP2
Default：RS-232
COM1 RS-232/422/485 setting
JP3
Default：RS-232
HD Audio Line Out / Speaker Out Select
JP4
Default：Line Out
COM2 Data/Power Mode Select
JP5
Default：RS-232 Data
COM1 Data/Power Mode Select
JP6
Default：Standby Power Mod
CMOS Clear
JP7
Default：Normal Operation
Power On Control Mode
Default：Power On control by Front Panel
JP8
Connector
USB 4,5 Port Power(5V) Selection
JP10
Default：Standby Power Mode
CompactFlash
Default：3.3V type CompactFlash
JP11
Support
USB 0,1 Port Power(5V) Selection
JP12
Default：Main Power Mode
LVDS LCD Type Support Selection
JP13
Default：3.3V type LVDS LCD Support
USB 2,3 Port Power(5V) Selection
JP14
Default：Standby Power Mode
JUMPERS AND CONNECTORS
SHB212 PICMG1.3 Half-Size SBC User's Manual
Description
TM
Type Selection
TM
Jumper Setting
Short 1-2
Short 3-5、4-6
Short 3-5、4-6
Short 1-3、2-4
Short 7-9、8-10
Short 7-9、8-10
Short 1-2
Short 1-2
Short 2-3
Short 1-2
Short 1-2
Short 1-2
Short 2-3
9