Using The Access Control Option - Ubee DDW365 User Manual

Ubee Interactive
WPS Add Client
Add a client
Client PIN
Authorized Client MAC
9.2.1 Enabling a Closed Network on the Primary Network
You can enable the Closed Network option so the SSID cannot be broadcast or seen by
others.
Steps
To enable a closed network:
1. Access the pull down menu for the Closed Network.
2. Choose Enabled to enable a closed network. Automatic Security Configuration is
disabled.
Note: WPS must be disabled before Closed Network can be enabled.
9.3

Using the Access Control Option

Use the Access Control option to configure which clients can access your wireless
network.
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
Label
Activates wireless protected setup (WPS) security on the
device.
To add a client:
1. Click Add a client. The WPS Add Client screen is
2. Click PUSH on the WPS Add Client screen.The WPS
3. Press the WPS button on the device.
Defines a PIN number for client access.
Defines the MAC address of the authorized client.
Description
displayed.
button is activated on the device, indicated by a flashing
white light on top of the unit.

Using the Access Control Option

70