Using The Options Option - Ubee DDW365 User Manual

Ubee Interactive
WAN Blocking
Ipsec PassThrough
PPTP PassThrough
Remote Config Management
Multicast Enable
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
Label
Blocks connection requests initialized from Internet users
when enabled. WAN Blocking must be disabled to be able to
PING the WAN gateway IP.
Forces the router to redirect the IPSec request to the local
host when enabled. NAT fails this attempt if Internet users
initialize an IPSec VPN request to a host located behind the
router.
Forces the router to redirect the PPTP request to the local host
when enabled. NAT fails this attempt if Internet users initialize
a PPTP VPN request to a host located behind the router.
Enables or disables access to the device from a remote
system in order to configure settings. Remote management
can be achieved by using SNMP, web/HTTP or telnet.
Optimizes the bandwidth utilization compared with unicast
(especially video streaming applications).

Using the Options Option

Description
37