Using The Pass Through Option - Ubee DDW365 User Manual

Ubee Interactive
Trigger Start Port
Trigger End Port
Target Start Port
Target End Port
Protocol
Description
Enabled
Apply
6.7

Using the Pass Through Option

Use the Pass Through option to configure a pass through table. Devices in the pass
through table are treated as bridge devices, storing and forwarding data between LAN
interconnections.
Steps
To configure a pass through table:
1. Click Advanced from the main menu.
2. Click Pass Through from the left side menu. The pass through fields are explained
following this screen example.
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
Label
Defines a port number or the starting port number in a range
of port numbers.
Defines a port number or the ending port number in a range of
port numbers.
Defines a port number or the starting port number in a range
of port numbers.
Defines a port number or the ending port number in a range of
port numbers.
Defines the protocol type for this rule, UDP, TCP, or Both.
Names the triggering rule.
Enables (on) or disables (off) the triggering rule.
Saves changes.

Using the Pass Through Option

Description
49