Ubee DDW365 User Manual page 78

Ubee Interactive
WMM Support
No-Acknowledgement
Power Save Support
Apply
EDCA AP Parameters
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
Label
Enables (On) or disables (Off) WMM support.
Enables (On) or disables (Off) acknowledging data frames. In
QoS mode, frames to send can have two values: QosAck and
QosNoAck. Frames with QosNoAck are not acknowledged,
avoiding the retransmission of highly time-critical data.
Enables (On) or disables (Off) power savings. WMM Power
Save increases the efficiency and flexibility of data transmission.
The wireless client device can "doze" between packets to save
power, while the wireless access point buffers downlink frames.
The application chooses the time to wake up and receive data
packets to maximize power conservation without sacrificing
quality of service.
Saves changes to the WMM settings above.
Allows you to prioritize wireless network traffic. Enhanced
Distributed Channel Access – Access Point (EDCA-AP)
provides four access categories (ACs):

AC_BE – Best Effort, medium throughput and delay. Most
traditional IP data is sent to this queue.

AC_BK – Background, high throughput. Bulk data that
requires maximum throughput and is not time-sensitive is
sent to this queue (for example, FTP data).

AC_VI – Video

AC_VO – Voice
Using the Wi-Fi Multimedia Option
Description
74