Using The Dmz Host Option - Ubee DDW365 User Manual

Ubee Interactive
Pass Through MAC Addresses
Add MAC Address
Addresses entered: n/32
Remove MAC Address
Clear All
6.8

Using the DMZ Host Option

Use the DMZ (Demilitarized Zone) Host option to expose a host IP address to the WAN
(public Internet). You can use this option when applications do not work with port triggers
or other networking strategies.
Steps
To set up a DMZ host:
1. Connect a PC to an Ethernet port on the DDW365. Make sure both devices are
powered on and functioning.
2. Connect a Home Gateway (or other device you wish to be in the DMZ) to an Ethernet
port on the DDW365.
3. Log in to the DDW365 Web user interface.
4. Click Advanced from the main menu.
5. Click DMZ Host from the left side menu.
6. Enter the IP address of the Home Gateway (host device) to be exposed to the WAN.
7. Test the device to ensure Internet access is available and the device is functional. For
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
Label
Defines the input host's MAC address.
Adds the input host's MAC address.
Displays the MAC addresses to be blocked. The number of
MAC addresses is shown as 0/32 where 0 is the number of
addresses in the list. You can add up to 32 MAC addresses at
one time.
Removes the input host's MAC address.
Removes all of the input host's MAC addresses.

Using the DMZ Host Option

Description
50