Using The Client List Option - Ubee DDW365 User Manual

Ubee Interactive
Utility
Traceroute Parameters
Target
Max Hops
Data Size
Base Port
Resolve Host
Start Test/Clear Results
Results
4.5

Using the Client List Option

The Client List screen displays computers and devices connected to the DDW365.
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
Provides a drop-down menu to choose Ping or Traceroute.
Defines the specific IP address or domain (for example,
google.com) to which you want to trace a route.
Defines the maximum number of hops. Hops are the number
of routers the traceroute traverses. Default is 30.
Defines the data size to send for the traceroute operation. The
default is 64.
Defines the destination port number. Default is 33434.
Enable (on) or disables (off) this option. When checked,
traceroute tries to find the name that matches the IP address.
Default is Off.
Defines what you want to do:

Start Test begins the traceroute.

Clear Results deletes previous test results in the Results
table.
Displays the results of the trace.

Using the Client List Option

24