Using The Ip Filtering Option - Ubee DDW365 User Manual

Ubee Interactive
PPTP
MSN
SIP
ICQ
IRC666x
ICQTalk
Net2Phone
IRC7000
IRC8000
Apply
6.2

Using the IP Filtering Option

Use the IP Filtering option to filter IP addresses to block Internet traffic to specific
network devices on the LAN. Any host on this list is not accessible to Internet traffic.
Note
You may also filter by the MAC address which does not require setting a static lease.
Refer to Using the MAC Filtering Option on page
Steps
To filter IP addresses:
1. Make sure a PC is connected to the DDW365 and both devices are powered on and
functioning.
2. Log in to the DDW365 Web user interface. Refer to
Locally on page
3. Click Advanced from the main menu.
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
Label
Enables or disables the point-to-point tunneling protocol
(PPTP) used to implement a virtual private network.
Enables or disables the Microsoft network protocol used for
instant messaging.
Enables or disables the session initiation protocol application
layer gateway (SIP ALG). SIP ALG inspects protocol packets
and formats SIP message headers and SDP body to ensure
proper signaling. Note: Some hosted VoIP services prefer this
function to be performed by their own session border controller
(SBC) and require the SIP ALG to be disabled. Some IP-PBXs
may require SIP ALG enabled.
Enables or disables the ICQ instant messaging program.
Enables or disables the Internet relay chat (IRC) protocol used
for text messaging.
Enables or disables the ICQTalk instant messaging program.
Enables or disables Net2Phone SIP- and PacketCable-based
VoIP.
Enables or disables the Internet relay chat protocol on TCP
port TCP 7000 used for text messaging and group forums.
Enables or disables the Internet relay chat protocol on UDP
port 8000 used for text messaging and group forums.
Saves changes.
13.
Description
40.
Accessing the Web User Interface

Using the IP Filtering Option

39