Ubee DDW365 User Manual page 26

Ubee Interactive
Steps
To test connectivity between devices:
1. Click Status from main menu.
1. Click Diagnostics from the left side menu.
2. Choose Ping from the Utility drop-down menu.
3. Enter new parameter values or accept the default values.
4. Click Start Test. Field descriptions are listed below the screen example.
Utility
Ping Test Parameters
Target
Ping Size
No. of Pings
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
Label
Provides a drop-down menu to choose Ping or Traceroute.
Defines the IP address to which you want to send a ping.
Defines the packet size (bytes of data) to send for the ping
operation. Default is 64.
Defines the number of ping commands to send to the ping
target. Default is 3 pings.
Using the Diagnostics Option
Description
22