Using The Time Option - Ubee DDW365 User Manual

Ubee Interactive
5.5

Using the Time Option

The Time option allows you to configure the system time obtained from the network
servers via Simple Network Time Protocol (SNTP). SNTP is a protocol for synchronizing
the clocks of computing devices over networks. The device must be reset for changes to
take effect.
Steps
To configure system time:
1. Click Basic from the main menu.
2. Click Time from the left side menu. Field descriptions are listed below the screen
example.
Enable SNTP
Current Time
System Start Time
Time Server 1
Time Server 2
Time Server 3
Time Zone Offset
Apply
Reset Values
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
Label
Enables (Yes) or disables (No) the SNTP feature.
Displays the current system time.
Displays the time the system was started.
Defines the IP address or domain name of the time server.
Use the one provided or enter an alternative choice.
Defines the IP address or domain name of the time server.
Use the one provided or enter an alternative choice.
Defines the IP address or domain name of the time server.
Use the one provided or enter an alternative choice.
Defines the time zone offset in hours and minutes from
Greenwich Mean Time. For example: 8 hours means GMT +8,
-1 hour means GMT -1.
Saves changes.
Resets the screen to factory defaults when clicked.
Using the Time Option
Description
35