Using The Wireless Access Control Option - Ubee DDW262.G User Manual

Using the Wireless Access Control Option

6.3 Using the Wireless Access Control Option
The Access Control option allows you to configure which clients can access your
wireless network.
Steps
To configure client access:
1. Access the Web interface.
2. Click the Wireless link from the top of the screen.
3. Click Access Control from the left side of the screen. The Access Control fields are
explained following this screen example.
52
Label
802.1x Authentication
Network Key 1-4
Current Network Key
Passphrase
Generate WEP Keys
Apply
Automatic Security
Configuration
Device Name
PIN
Configure
WPS Add Client/Push
Button/PIN
Apply
Ubee DDW262.G Wireless Cable Modem and Router Subscriber User Guide • September 2011
Description
Enables or disables 802.1x to authenticate wireless clients.
Lets you pre-define up to 4 keys for 64-bit or 128-bit (64-bit
keys require 10 hexadecimal digits) (128-bit key require 26
hexadecimal digits).
Selects one of the four pre-defined keys as the current network
key.
Sets the WEP encryption key by entering a word or group of
printable characters in the Passphrase box and clicking
Generate WEP keys. These characters are case sensitive.
Forces the device to generate 4 WEP keys automatically.
Saves the wireless configurations when clicked.
Sets up WPS (Wi-Fi Protected Setup) for devices connecting
to the wireless network.
Defines a name for this wireless cable modem for WPS.
Defines the Personal Identification Number for this wireless
cable modem.
Applies the WPS-Device Name/PIN Setup.
Selects which method to have connecting wireless clients
connect to the wireless network: Push Button or PIN. If PIN is
selected, enter the PIN clients need to enter to access the
DDW262.G. For push button, a client pushes a button, either
on the device or in software on the device, and then on the
wireless cable modem to establish secure communications.
Saves WPS configurations when clicked.
Ubee Interactive