View; First Use; Install Sim Card; Charging - MeiTrack MVT600 User Manual

5. View

GPS LED
GPS Antenna
USB Port
Power, I/O Handset

6. First Use

6.1 Install SIM Card

Check that the SIM has not run out of credit (test the SIM in a phone to make sure it
can send and receive SMS);
Check that the SIM Lock code is turned off;
If you require the function of sending an SMS location report to the authorized phone
number when it makes a call to the MVT600, please make sure the SIM installed
supports displaying caller ID.
Before installing the SIM card, turn off the power for MVT600.
Unscrew and remove cover.
Insert the SIM card by sliding it into the card holder with the chip module facing to
the connectors on PCB.
Replace the cover and screw it in.

6.2 Charging

Please connect GND (-Black) and Power (+Red) wires to 12V or 24 external power and make sure to charge the
battery for at least 3 hours.
Configuration and testing suggested be prior to installation.
Copyright © 2014 Meitrack Group All rights reserved.
File Name: MEITRACK MVT600 User Guide
Project: MVT600
Sub Project: User Guide
Revision: V3.1
Mic./Speaker
SIM
Micro SD
Camera Camera
8 hours is highly appreciated.
Creator:
Creation Date:
Update Date:
Page:
Confidential:
GSM LED
GSM Antenna
On/Off
RS232 RFID Reader
Cavana Cheung
2010-09-13
2013-09-16
- 6 - of 25
External Documentation
- 6 -