Geo-Fence Alarm - B05; Set Anti-Theft - B21; Time Zone- B35 - MeiTrack MVT600 User Manual

Note: In any condition, the device will directly quit the sleep mode and back to normal working mode by SMS or
GPRS command to turn off the sleep mode.
Example: 0000,A73,2
SMS Get: 353358017784062,A73,OK
6.4.4 Geo-fence Alarm – B05
Command: B05,P,latitude,longitude,radius,in,out
SMS Get: IMEI,B05,OK
Note:
P: 1 to 8. Max 8 Geo-fence waypoints can be set.
Latitude: Latitude in decimal degrees of the waypoint center.
Longitude: Longitude in decimal degrees of the waypoint center.
Radius: [1, 4294967295] in meters.
In = 0, turn off the alarm when the tracker enters the waypoint;
In = 1, turn on the alarm when the tracker enters the waypoint.
Out = 0, turn off the alarm when the tracker exits the waypoint;
Out = 1, turn on the alarm when the tracker exits the waypoint.
Example: 0000,B05,1,22.91319,114.07988,1000,0,1
SMS Get: 353358017784062,B05,OK
Once the tracker goes outside of
message will be received.
353358017784062,ExitGEO,22.918186,114.089823,080229123816,A,10,22,16,32,1,21,6667,850,,0000
6.4.5 Set Anti-theft – B21
Command: 0000,B21,Status
SMS Get: IMEI,B21,OK
Note:
Status=1, turn on Anti-theft (default); the device alarms when input 2 (negative input) and input 3 (positive input)
are active;
Status=0, turn off Anti-theft; the device doesn't alarm when input 2 (negative input) and input 3 (positive input)
are active.
6.4.6 Time Zone– B35
Command: 0000,B35,T
SMS Get: IMEI,B35,OK
Note:
Default time of the tracker is GMT. You can use this command to change the time on your tracker to your local
time. This command is for SMS tracking only.
Copyright © 2014 Meitrack Group All rights reserved.
File Name: MEITRACK MVT600 User Guide
Project: MVT600
Sub Project: User Guide
Revision: V3.1
the circle (center: 22.91319,114.07988 and radius 1000 meters), the following
Creator: Cavana Cheung
Creation Date:
Update Date:
Page:
Confidential: External Documentation
2010-09-13
2013-09-16
- 10 - of 25
- 10 -