Input )
11 (OUT3)
Yellow
12(Digital
Blue
Temperatur
e)
Power/GND (PIN1/PIN2)
Connect GND (-Black) and Power (+Red) wires to the battery of vehicle.
7.1.2 Digital Input (PIN4/5, negative triggering)
7.1.3 Digital Input (PIN3, positive triggering)
Copyright © 2014 Meitrack Group All rights reserved.
File Name:
MEITRACK MVT600 User Guide
Project:
MVT600
Sub Project:
User Guide
Revision:
V3.1
Output3. It can be used to connect with relay for engine immobilization.
Low voltage (0V) when effective and open drain when ineffective.
Output open drain sink voltage (ineffective): 45V max.
Output low voltage sink current (effective): 500mA max.
TTL3.3V level, defaulted to be used to connect A52 digital temperature sensor
with A61 sensor box
Note: the current should be below DC/AC3.3V, otherwise, the device may be
damaged
Creator:
Cavana Cheung
Creation Date:
Update Date:
Page:
Confidential:
External Documentation
2010-09-13
2013-09-16
- 17 - of 25
- 17 -