MeiTrack MVT600 User Manual page 8

Content
Now
110721 16:40
V
10
0Km/h
97%
http://maps.google.c
om/maps?f=q&hl=en
&q=22.540103,114.0
82329 &ie=UTF8&z=
16&iwloc=addr&om=
1
If your mobile cannot visit HTTP websites, input the latitude and longitude into Google Maps as the following
picture shows to get the position:
More SMS commands
You can configure T1 by mobile phone or by computer using the Meitrack Manager.
For more details, please refer to part 6.5 Configure by Computer.
Note:
1. Password is 4 digits only and defaulted as 0000. You can change the password by using the Meitrack
Manager and SMS command.
2. MVT 600 will only accept commands and send SMS report from a user with the correct password.
If preauthorized phone number was set, only this phone number can receive the preset event SMS reports.
Copyright © 2014 Meitrack Group All rights reserved.
File Name: MEITRACK MVT600 User Guide
Project: MVT600
Sub Project: User Guide
Revision: V3.1
Description
Current Location
Date & Time: 21 July, 2011, 16:40pm
No GPS fixed
GSM signal=10
Speed=0
Battery Power: 97%
Latitude: 22.513015
Longitude: 114.057235
Creator:
Creation Date:
Update Date:
Page:
Confidential: External Documentation
Note
Alarm Type
Date & Time in YYMMDD HH:MM
GPS Status Indicator:
A = valid, V = invalid
GSM Signal. Decimal Digit (0~31)
KM/h. Decimal digit
Battery Power Balance (Percentage)
Google Maps Web Link with Latitude and
Longitude. Click on the link to get the
location.
Cavana Cheung
2010-09-13
2013-09-16
- 8 - of 25
- 8 -