Special Turns; Figure 111 - Typical Special Turn Query - ComNav Commander P2 Installation & Operation Manual

ComNav Commander P2 Installation & Operation

Special Turns

There are a number of Special Turns pre-programmed into the Commander P2 system.
Special Turns can be executed only in AUTO, WORK & WIND modes.
To execute a Special Turn (with the autopilot in the appropriate mode):
1) Press the TURN button. The default special turn will be displayed, along with a query
2) If a different special turn other than the default shown is desired, press the TURN
3) Press either the PORT or STARBOARD ARROW button to select the direction in
The default Special Turn can be changed as desired by adjusting the "Default Turn" in the
STANDBY menu (see page 112).
•
Special Turns can be aborted by pressing the TURN button again while the Special Turn
is executing, or by changing modes.
Document PN 29010074 V3.1
for a direction.
Figure 111 – Typical Special Turn Query
button again. The next special turn in the available list will be shown. Press the
TURN button again and again until the desired special turn is shown.
which to execute the Special Turn.
- 146 -
Advanced Operations