Wind Menu; Wind Source; Figure 110 - Wind Menu, Pages 1 & 2; Table 6 - Wind Source Selection - ComNav Commander P2 Installation & Operation Manual

ComNav Commander P2 Installation & Operation

Wind Menu

The Wind menu has all of the adjustable parameters that are involved with WIND mode. To
access the Wind menu, double-press the

Wind Source

Wind data may be received either directly from a ComNav Twin-Fin Wind Transducer, or from
other devices that provide wind data in NMEA 0183 format. Select the appropriate value
according to the table below:
Setting
Vane
NAV1A
NAV1T
NAV2A
NAV2T
Table 6 – Wind Source Selection
Document PN 29010074 V3.1
Fn
Figure 110 – Wind Menu, pages 1 & 2
Wind Source
Twin-Fin Wind
Transducer
NAV1 input,
Apparent wind
NAV1 input,
True wind
NAV2 input,
Apparent wind
NAV2 input,
True wind
- 144 -
button.
Comments
Wind direction is taken directly from the Wind
Transducer. Thus, vessel will sail to the
Apparent Wind.
Wind direction is taken from a third-party
wind-measuring instrument that provides
Apparent Wind data in NMEA 0183 format. The
device is connected to the NAV1 input.
Wind direction is taken from a third-party
wind-measuring instrument that provides
True Wind data in NMEA 0183 format. The
device is connected to the NAV1 input.
Wind direction is taken from a third-party
wind-measuring instrument that provides
Apparent Wind data in NMEA 0183 format. The
device is connected to the NAV2 input.
Wind direction is taken from a third-party
wind-measuring instrument that provides
True Wind data in NMEA 0183 format. The
device is connected to the NAV2 input
Advanced Operations