Pretack (Preset-Tack); Figure 120 - Pretack Turn Query - ComNav Commander P2 Installation & Operation Manual

ComNav Commander P2 Installation & Operation

Pretack (Preset-Tack)

Preset-Tack Special Turns are only available in AUTO mode, and if the Vessel Type in the
Dockside Setup menu is set to Sail.
The Preset-Tack turn will turn the vessel the number of degrees specified by the Pretack
Angle in the Wind menu. This turn is used when you need to tack while sailing the vessel to
a compass course, rather than to a specific wind angle as is done in WIND mode).
Document PN 29010074 V3.1
Figure 120 – PreTack Turn Query
Important!
Preset-Tack turns should initially be tested out in light to
moderate winds and calm seas, in order to understand how it works on
your boat.
- 151 -
Advanced Operations