Appendix 7: Removal Instructions - Osburn MATRIX INBUILT Installation And Operation Manual

Osburn Matrix Inbuilt Installation and Operation Manual

APPENDIX 7: REMOVAL INSTRUCTIONS

For the purpose of inspecting the wood inbuilt itself or the fireplace, your wood inbuilt may need
to be removed. To remove your wood inbuilt follow these instructions:
• Remove the faceplate assembly (A) using the reverse steps of Appendix 3.
• If installed, take-off the backing plates (B) and (C) and the projection kit by removing the front
screws securing them to the wood inbuilt.
• Remove the screws that secure the flue liner to the fixation brackets (E).
• Unscrew the leveling bolts (F) located on each side of the wood inbuilt.
• Pull-out the wood inbuilt from the fireplace opening to perform the maintenance work.
______________________________________________________________________________ 51