Table of Contents
Advertisement
Osburn Matrix Inbuilt Installation and Operation Manual
7 SAFETY INFORMATION
7.1 SUMMARY OF INSTALLATION CAUTIONS AND WARNINGS
DISCONNECT THE FAN'S ELECTRIC POWER BEFORE SERVICING.
•
THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE APPLIANCE
•
ALWAYS OVERRIDES THE INFORMATION PUBLISHED, IN ANY OTHER MEDIA (OWNER'S
MANUAL, CATALOGUES, FLYERS, MAGAZINES AND/OR WEB SITES).
•
MIXING OF APPLIANCE OR FLUE-SYSTEM COMPONENTS FROM DIFFERENT SOURCES OR
MODIFYING COMPONENTS MAY RESULT IN HAZARDOUS CONDTIONS. WHERE ANY SUCH
CHANGES ARE PLANNED, THE MANUFACTURER SHOULD BE CONTACTED IN ADVANCE.
CONNECT THIS WOOD INBUILT ONLY TO A TRIPLE SKIN FLUE KIT FOR USE WITH SOLID FUEL
•
OR TO A LINED MASONRY FLUE SYSTEM CONFORMING TO NATIONAL AND LOCAL BUILDING
CODES.
USE SMOKE DETECTORS IN THE ROOM WHERE YOUR WOOD INBUILT IS INSTALLED.
•
IF REQUIRED, A SUPPLY OF COMBUSTION AIR SHALL BE PROVIDED TO THE ROOM OR SPACE.
•
•
KEEP FURNITURE AND DRAPES WELL AWAY FROM THE WOOD INBUILT.
•
DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR DISTRIBUTION DUCTWORK
UNLESS SPECIFICALLY APPROVED FOR SUCH INSTALLATION.
DO NOT CONNECT THIS UNIT TO A FLUE OR FLUE SYSTEM SERVING ANOTHER APPLIANCE.
•
•
THE WOOD INBUILT AND ITS STAINLESS STEEL FLUE LINER ARE TO BE INSTALLED ONLY
WITHIN A LINED MASONRY FLUE SYSTEM AND MASONRY FIREPLACE CONFORMING TO
BUILDING CODES FOR USE WITH SOLID FUEL. DO NOT REMOVE BRICKS OR MORTAR FROM
THE EXISTING FIREPLACE WHEN INSTALLING THE WOOD INBUILT.
______________________________________________________________________________ 29
Advertisement
Table of Contents
