Table of Contents
Advertisement
Osburn Matrix Inbuilt Installation and Operation Manual
7.2 REGULATIONS COVERING WOOD INBUILT INSTALLATION
IT IS RECOMMENDED THAT THE INSTALLATION OF YOUR OSBURN WOOD INBUILT BE CARRIED
OUT BY A QUALIFIED SPECIALIST INSTALLER. IF ANY ELECTRICAL WORK IS REQUIRED, IT MUST BE
CARRIED OUT BY A LICENSED ELECTRICIAN.
WARNING: The instructions pertaining to the installation of your wood inbuilt comply with the
AS/NZS 2918:2001 standard. THE APPLIANCE AND FLUE SYSTEM MUST THEREFORE BE INSTALLED
IN ACCORDANCE WITH AS/NZS 2918:2001 AND THE APPROPRIATE REQUIREMENTS OF THE
RELEVANT BUILDING CODE OR CODES.
WARNING: APPLIANCES INSTALLED IN ACCORDANCE WITH THIS STANDARD SHALL COMPLY
WITH THE REQUIREMENTS OF AS/NZS 4012/4013 (1999) WHERE REQUIRED BY THE
REGULATORY AUTHORITY, I.E. THE APPLIANCE SHALL BE IDENTIFIABLE BY A COMPLIANCE PLATE
WITH THE MARKING "TESTED TO AS/NZS 4012/4013 (1999)".
ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN WRITING BY THE
TESTING AUTHORITY IS CONSIDERED TO BE IN BREACH OF THE APPROVAL GRANTED FOR
COMPLIANCE WITH AS/NZS 4012/4013 (1999).
NOTE:
The wood inbuilt is not approved for use with a so-called "positive flue connection" to
the clay tile of a masonry flue system.
30 ______________________________________________________________________________
Advertisement
Table of Contents
