Table of Contents
Advertisement
APPENDIx 7: REMOVAL INSTRUCTIONS
For inspecting purposes, the insert may need to be removed. To remove the insert, follow these
instructions:
1.
Unscrew the faceplate fastener (C) holding the faceplate (B) on the insert.
2.
Remove faceplate (B) by pulling on it.
3.
Remove the blower assembly (A).
4.
Remove the three screws securing the pipe connector (D).
5.
Unscrew the bolts securing the insert to the floor on each side of the unit (E).
Page 50
Installation and Operation Manual - Osburn 3500-I
Advertisement
Table of Contents
