Table of Contents
Advertisement
APPENDIX 10: REMOVAL INSTRUCTIONS
For inspecting purposes, the insert may need to be removed. To remove the insert, follow these
instructions:
Remove the faceplate (A and B). Refer to Appendix 3.
1.
2.
If installed remove the cuttable faceplate (C).
3.
Remove the three screws securing the pipe connector (F).
4.
Unscrew the bolts securing the insert to the floor on each side of the unit (E).
B
Installation and Operation Manual - Matrix 2700 Insert
A
F
C
G
Page 51
Advertisement
Table of Contents
