No Read; Video Reverse - Honeywell Xenon 1900 User Manual

No Read

With No Read turned On, the scanner notifies you if a code cannot be read. If
using an EZConfig-Scanning Tool Scan Data Window (see page 10-3), an "NR"
appears when a code cannot be read. If No Read is turned Off, the "NR" will
not appear. Default = Off.
On
If you want a different notation than "NR," for example, "Error," or "Bad Code,"
you can edit the output message (see
The hex code for the No Read symbol is 9C.

Video Reverse

Video Reverse is used to allow the scanner to read bar codes that are inverted.
The Video Reverse Off bar code below is an example of this type of bar code.
Scan Video Reverse Only to read only inverted bar codes. Scan Video
Reverse and Standard Bar Codes to read both types of codes.
Note: After scanning Video Reverse Only, menu bar codes cannot be read.
You must scan Video Reverse Off or Video Reverse and Standard Bar
Codes in order to read menu bar codes.
Note: Images downloaded from the unit are not reversed. This is a setting for
decoding only.
Video Reverse Only
VIDREV0.
* Video Reverse Off
4 - 28
Data Formatting
Video Reverse and Standard Bar
* Off
beginning on page 6-1).
Codes