Rs232 Serial Port; Rs485 - Honeywell Xenon 1900 User Manual

Area-imaging scanner
Hide thumbs Also See for Xenon 1900:
Table of Contents

Advertisement

RS232 Serial Port

The RS232 Interface bar code is used when connecting to the serial port of a
PC or terminal. The following RS232 Interface bar code also programs a car-
riage return (CR) and a line feed (LF) suffix, baud rate, and data format as indi-
cated below. It also changes the trigger mode to manual.
Option
Baud Rate
Data Format

RS485

Scan one of the following "Plug and Play" codes to program the scanner for an
IBM POS terminal interface.
Note: This interface is not supported in Granit devices.
After scanning one of these codes, you must power cycle the cash
register.
IBM Port 5B Interface
IBM Port 17 Interface
2 - 2
Setting
115,200 bps
8 data bits, no parity bit, 1 stop bit
RS232 Interface
IBM Port 9B
HHBCR-1 Interface
IBM Port 9B
HHBCR-2 Interface

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Granit 1911iXenon 1910Granit 1910iXenon 1902Xenon 1912

Table of Contents