Scanner Power Time-Out Timer - Honeywell Xenon 1900 User Manual

The sounds are as follows:
Setting
0
1
2
3
4
5
6
7
Base Alarm Type
Note: Only the CCB01-010BT
base has an alarm

Scanner Power Time-Out Timer

Note: Scanner Power Time-out Timer only applies to cordless systems. It does
not apply to corded scanners.
When there is no activity within a specified time period, the scanner enters low
power mode. Scan the appropriate scanner power time-out bar code to change
the time-out duration (in seconds).
Note: Scanning zero (0) is the equivalent of setting no time-out.
3 - 16
Sound
3 long beeps, medium pitch
3 long beeps, high pitch
4 short beeps, medium pitch
4 short beeps, high pitch
single chirps, medium pitch
2 chirps, then 1 chirp, medium pitch
single chirps, high pitch
2 chirps, then 1 chirp, high pitch
Scanner Alarm Type